Skip to main content
MIG-MAG cored wires range for C-Mn steels


MIG-MAG cored wires range for C-Mn steels

STEELCORED 14 HD is a seamless copper coated rutile flux cored wire with a high filling degree, resulting in a higher current carrying capacity and high deposition rate.

Product Advantages

✔ Good slag removal and finely rippled
✔ Low spatter loss

The welding speed is increased which leads to a saving of time and reduction of costs. It can be used in all positions with only one welding parameter setting (24 volts, wire
feed = 9 m/min, wire dia. 1,2 mm).

STEELCORED 14 HD is used for manual welding, as well as in fully mechanized welding. It is preferably used under mixed shielding gas and is characterized by low spatter loss, good slag removal and finely rippled, pore-free welds without undercut.


    STEELCORED 14HD meets the classifications:

    • EN ISO 17632-A: T 46 2 P C 1 H5
    • EN ISO 17632-A: T 46 3 P M 1 H5
    • EN ISO 17632-B: T552T1-1CA-UH5
    • EN ISO 17632-B: T553T1-1MA-UH5
    • AWS A5.20: E71T-1C-H4
    • AWS A5.20: E71T-1M-JH4
    • AWS A5.36: E71T1-C1A0-CS1-H4
    • AWS A5.36: E71T1-M21A2-CS1-H4

    STEELCORED 14HD – Chemical Analysis

      C Mn Si P S
    All weld metal 0,05 1,2 0,55 0.01 0.01

    STEELCORED 14HD – Mechanical Properties

    Heat Treatment Yield Strength(N/mm²) Tensile Strength(N/mm²) Elongation A5 (%)
    Impact Energy ISO - V (J)
            (-20°C) (-30°C)
    As Welded ≥ 460 550-650 ≥ 24 ≥ 80 ≥ 50