Skip to main content
MIG-MAG cored wires range for C-Mn steels


MIG-MAG cored wires range for C-Mn steels

SAFDUAL 100 is folded rutile flux-cored wire for gas-shielded metal arc welding of unalloyed steels for operating temperatures from -30°C up to +450°C in all welding positions.

Product advantages:

✔ Excellent radiographic quality
✔ Suitable for all-position welding
✔ The weld pool is easily controllable

The weld pool of the SAFDUAL 100 is easily controllable with outstanding welding properties.
The enhanced filling results in increased current carrying capacity and hence deposition rate, thus essentially increasing welding speed, leads to savings of time and costs.
Low spatter loss and easy slag removal result in smooth and finely rippled welds without undercut.

SAFDUAL 100 can be used in manual and fully-mechanised processes, very well suited for use on ceramic backing. Preferably used under mixed gas.
The use of CO2 is possible. Rutile strip flux cored wire with fast-solidifying slag.
Used in shipyards, storage tanks, structural work in general.


    SAFDUAL 100 meets the classifications:

    • EN ISO 17632-A: T 42 2 P C 1 H5
    • EN ISO 17632-A: T 42 3 P M 1 H5
    • EN ISO 17632-B: T492T1-1CA-UH5
    • EN ISO 17632-B: T493T1-1MA-UH5
    • AWS A5.20: E71T-1C-H4
    • AWS A5.20: E71T-1M-JH4
    • AWS A5.36: E71T1-C1A0-CS1-H4
    • AWS A5.36: E71T1-M21A2-CS1-H4

    SAFDUAL 100 – Chemical Analysis

      C Mn Si P S
    All weld metal 0,05 1,4 0,5 ≤ 0.02 ≤ 0.025

    SAFDUAL 100 – Mechanical Properties

    Yield Strength(N/mm²) Tensile Strength(N/mm²) Elongation A5 (%) Impact Energy ISO - V (J)
    (-20°C) (-30°C)
    ≥ 420 500-640 ≥ 20 ≥ 80 ≥ 47